On Product
Trend analysis of CNC machine tool industry in 2015

Currently, the machine continues to be applied to various fields, to speed up the development of the industry, but also to people's lives has brought great convenience and rapid development, did not bring the interests of business. Future high-end CNC machine tools in the domestic market prospects.

CNC machine tool industry, information technology and networking is an inevitable trend, is intelligent basis. In recent years with the development of network technology and sensor technology, machine tool increasingly used in mass production, its management, output, output value, scheduling, etc., can contact and automation technology, which can be fully realized all-digital, error control, data compensation and network diagnostics.

According to Yu-Chi Industry Market Research Center for CNC machine tool industry is an industry with a high-tech. Which is characterized by high technical requirements, product replacement fast, high investment density, product comprehensive, quality and performance is critical functional components of the machine. Product market capacity is small, powerful competitors. This coordinated and effective government support flexible business are made high demands. The basic policy direction is to make national policy guidance to improve the industry structure and the flexible and efficient mechanism for enterprises to better combine the three.

Due to the huge complex system of CNC technology, CNC system is part of the high-tech electronics industry, both hardware and software R & D content, require greater financial and technical strength, by no means a one can support. Reckless investment launched, unable to support future human and financial resources likely to cause undue loss, so the Government's guidance is necessary. CNC system production organizations, academia, research and technological so, research features should also be the case.
CNC machine tools is now necessary equipment manufacturing industry, is one of the necessary equipment, machinery manufacturing, while the purpose of use of CNC machine tools that can greatly increase the range of use, and the promotion of industrial production to a certain extent, improve efficiency. Since China's CNC machine tool technology to mature after the fields have begun widespread attention for CNC machine tools. At present, China's machine tool industry is in the casting period of rapid development, the industry is moving toward a qualitative change from the quantitative phase. This period is also casting machine industry from large to strong, more meaningful period of development.

Current domestic production of CNC machine tools can be roughly divided into economical machine, universal machine, three types of high-end machine tools. Cheap tools are basically open-loop control; universal machine uses semi-closed loop control technology, resolution up to 1 micron; high-end machine tools for closed-loop control, while a high-precision, high-speed, complex, with a variety of compensation, The new control function, automatic diagnosis, resolution up to 0.1 microns, the computer can be programmed to replace people.

Forecast from China Machine Tool Industry Development Prospects in the domestic application of economic understanding of CNC machine tools are basically domestic products, domestic products whether it is from the quality or reliability of the machine are able to meet most of the needs of users. Domestic universal CNC machine tools in about 60% to 70% of domestic products used, but it should be noted that these were made CNC machine tool numerical control system is about 80 percent are using foreign products. High-end machine tools domestic product accounted for only about 2%, basically rely on imports. In terms of market demand for low-end and mid-range machine tools approximately 50 to 50% and 40%, high-end CNC machine tool demand is about 10%.

Industrial automation is to achieve "Industry 4.0" basis, and industrial automation which is the most representative indicator of the popularity of the robot, the country currently only 21 per thousand units, and developed countries such as Japan, South Korea, compared to a huge difference, and the global average of 55 units / million compared, there is a big gap, so to speed up the development of industrial automation, processing and manufacturing of priority.
And the output value of China's machine tool production rate from NC 2004 11%, 27% and 34.6% in 2013, 54.7%, while the current average level of developed countries NC CNC machine tool production rate is above 65%, the output value of NC rate in about 80%, so the development of CNC machine tools are still great potential, 2020, the rate of high-end CNC machine tools and equipment will reach 80%. At present, the number of China's annual consumption of high-end CNC machine tools at around 5-6 million units, the amount of 60 billion yuan, of which imports accounted for about 85% of the total. China's CNC machine tool industry has good potential for future development, import substitution larger space.

In recent years, the rapid development of China's manufacturing industry, the huge demographic dividend support, in 2013 China became the world's first cargo trading nation, and won the "world factory" in the title. However, with the gradual disappearance of the demographic dividend, China's manufacturing industry has found itself in a predicament transformation; at the same time, such as the US, Germany and other developed countries have introduced a variety of support and stimulus to the development of domestic manufacturing industry was made in China urgent need for change in order to maintain the advantages of the future of China's manufacturing industry, but this time "industry 4.0" concept was born, just as the Chinese manufacturing industry pointed out the direction.

Online Inquiry

Contact US

Taian Hiscience Machinery Co.,Ltd.
Phone:+86 0538 8095612
Mobile:+86 18562315050
Email: franklee@tahience.com
Copyright 2014-2019 Taian Hiscience Machinery Co.,Ltd. All rights reserved.